Introduction
Before reading this article, take a look at your house. Are you satisfied enough with its looks that have been dirtier for months? You may be feeling a quite busy life in your business or office but clean and hygienic surroundings should be your first priority. This article will tell you how to get rid of grease on your floors and dirt on your concrete, brick, vinyl, walls and furniture.
Different Ways To Wash Through A Giraffetools Pressure Washer
Concrete Cleaning Through Giraffetools Pressure Washers
Concrete surfaces get dirty more often if not cared for on a regular basis. Taking care of concrete slabs can make them look really great. However, if you are living in a wet area then the concrete surfaces can always be dirty due to different forms of crud and algae.
To wash your concrete surface, you can use a pressure washer but you should be an expert at it. It is because a little increase in its pressure can cause damage to the structure of your concrete surface. The damage can be caused due to the porous structure of concrete. As a result, it can also decrease its lifespan.
You need to keep the pressure at 3000 PSI and hit the concrete surface at a distance of one meter. Make sure that the water stream is not concentrated at one single point on the surface otherwise it can damage the surface.
Vinyl Cleaning Through Giraffetools Pressure Washers
Of all the areas to make the best use of your giraffetools pressure washer, vinyl cleaning is still at the top of the list. The best part about vinyl cleaning is that it doesn’t get damaged through high pressure like wood or concrete. You will have to face less risk while washing the vinyl surface through a giraffetools pressure washer. You still need to apply less pressure to the vinyl surface but still, you need to be careful at it.
The most important thing to keep in mind is that you need to keep a downward angle while washing a vinyl surface. Make sure to use a detergent that is washable before it dries.
Brick Washing Through Giraffetools Pressure Washers
Bricks can also get dusty and dirtier just like concrete surfaces. Especially when you have a very old brick surface, its porous surface starts degrading with time. To keep it new and clean, you always need to take care of it by washing and cleaning it. You can make use of pressure washing for this purpose but it can be ill-advised if you concentrate the pressure on the mortar joints. They have the ability to crack and break if high pressure is applied.
Before pressure washing the bricks, you need to patch the mortars to avoid damage. The next step is to soak your wall from top to bottom in a proper way. This way it will be ready for cleaning purposes. After the patching and soaking process is done, now you have to wash the brick surface with detergent and low-pressure water. You should use a detergent that is particularly manufactured for brick washing.
Final Thoughts
This article only gave information about washing concrete, bricks, and vinyl surface through your giraffetools pressure washer. However, there are still so many other options that can make you achieve the best use of your giraffetools pressure washer. These include furniture, fences, decks, boats, and vehicles.
